Eruption amp settings — Valeton GP-100
The Van Halen guitar tone for “Eruption”, dialed in for a Valeton GP-100 with a Fox pro Lp 100. Studio version, Van Halen (1978)
1968 Marshall 1959 Super Lead (Variac to ~90V, all controls cranked) + Frankenstrat (Gibson PAF humbucker direct to volume) + MXR Phase 90 + Maestro Echoplex EP-3 + Univox EC-80A + Sunset Sound plate reverb
| Knob | Setting (0–10) |
|---|---|
| Gain | 8 |
| Bass | 6 |
| Mid | 8 |
| Treble | 7 |
| Presence | 7 |
| Reverb | 5 |
| Master | 8 |
01Phaser (MXR Phase 90 model)
Placed pre-amp for subtle frequency swoosh during tapping/riffs
02Tape Echo (Echoplex model)
Set to roughly 300ms slapback delay
03Plate Reverb
Emulates Sunset Sound plate reverb chamber
On the GP-100, use the UK Plexi model with pushed midrange and presence to replicate the cranked Variac Marshall. The Les Paul style humbuckers closely match Eddie's PAF output, so gain is kept at 8 to achieve natural saturation without excessive digital fizz. Replicate the pre-amp Phase 90 sweep by keeping the phaser rate low at around 9 o'clock.
Get this tone on your amp
These settings are for a Valeton GP-100. ToneAdapt matches any song to whatever amp, guitar and pedals you own — first match is free.
Get ToneAdapt on Google PlaySong, artist and gear names are used to identify the tone being matched; ToneAdapt is not affiliated with or endorsed by the artists or manufacturers mentioned. Settings are AI-generated starting points — trust your ears.