Nightmare amp settings — Zoom B1 Four
The Avenged Sevenfold guitar tone for “Nightmare”, dialed in for a Zoom B1 Four with a Squier Affinity Stratocaster. Studio version, Nightmare (2010) — main riff
Bogner Uberschall Rev 1 prototype + Diezel VH4 blend, Schecter Synyster Gates Custom-S with Seymour Duncan SH-8 Invader (bridge), MXR MC401 Boost
| Knob | Setting (0–10) |
|---|---|
| Gain | 8 |
| Bass | 6 |
| Mid | 4 |
| Treble | 6 |
| Reverb | 0 |
| Master | 7 |
01ZNR (Zoom Noise Reduction)
Tightens silence between riffs — essential for high-gain clarity
02Zoom Dist+ (or MS Crunch model as drive block)
Use the Dist+ or MetalZone-style block to push gain past the amp model's ceiling — the B1 Four amp models alone won't reach Uberschall saturation
The original uses a Bogner Uberschall/Diezel blend with hot ceramic humbuckers. Your Strat's single-coil bridge pickup outputs roughly half the signal and is brighter, so gain +1-2 over the original's amp setting and bass +1 to compensate for the thinner low-end. Mid scooped to 4 because the original is already scooped and single-coils add upper-mid bite. The B1 Four is a bass unit — its amp models lack the tight low-mid punch of a dedicated guitar modeler, so a stacked drive block is mandatory to reach this saturation level.
Get this tone on your amp
These settings are for a Zoom B1 Four. ToneAdapt matches any song to whatever amp, guitar and pedals you own — first match is free.
Get ToneAdapt on Google PlaySong, artist and gear names are used to identify the tone being matched; ToneAdapt is not affiliated with or endorsed by the artists or manufacturers mentioned. Settings are AI-generated starting points — trust your ears.